A fun and summery way to give someone a greeting!

Use this pdf template to cut out your flip-flop shape.  Print two copies off, and cut one down the dotted line.  Use this cut copy for the flip flop top template – cut out the holes so that you can mark where to place your eyelets.

Here you can see I have cut out my main flip-flop card in pink card, and have chosen a patterned card for the top.

Punch holes for your eyelets in the end of the V as shown, and also in the bottom two marked holes on the flip-flop top.

You don’t need eyelets, you can skip the hole punching session and just use glue!!

Stick a 3d fixer pad to the back of the V as shown.

Turn the V over and attached to the marked place (from your template).

Now carefully turn the left hand side of the V round, and attach it to your flip-flop with an eyelet.

Your flip flop can now be attached to your main card shape.  Decorate it in any way you like!!!!

These GSD files are for people with cutting machines.

Flip-Flop

Base

Flip-Flop

Top

And here’s a box for you to send it in!

Flip-Flop

Strap

Flip Flop Shaped Card